- Make sure this fits by entering your model number.
- CCTV Camera AHD Tester 4.3″TFT Color LCD Portable AHD with built-in lithium battery, video input, audio input DC12V power supply
- 4.3 inch high image resolution monitor enable to show clear image that fits any place to use
- Equips with Lithium battery of high capability. Each 6hours recharge durables 5-8 working hours
- CCTV installation works best detection system is equipped with built-in lithium battery, video input, audio input, seven kinds of standard color bar output terminal and the DC12V power supply, only palm-sized, easy to carry operations
- Through DC power out enables user to inspect; correct camera or confirm installation. It’s convenient for video equipment that helps communication and discussion with clients during installation process
Features:
4.3 inch high image resolution monitor enable to show clear image that fits any place to use
Equips with Lithium battery of high capability. Each 6hours recharge durables 5-8 working hours
Support DC power for camera
Support analog camera test
The net line test function
Can carry out can see to turn to show that the net line conjunction circumstance and the net lines link the sequence
Specification:
Display:4.3″TFT Color LCD
Number of Pixel:480RGB(H)X272(V)
Video In:Video In x 1 (BNC connector)
7 kinds of color bar signal output
Export:DC power out x 1 (Support CCD camera of power source/Max electric currency 1500mA)
System Format:AHD-CVBS-NTSC / PAL
Light instruction:2 LED (Power IND = Green / Charging IND =Red)
Battery:Built-in rechargeable Lithium battery : 3.7V 3000mA/h
External power :DC 5V 1.0A Adapter
Dimension/ Weight:178mm (L) x110mm (W) x 40mm(H) Weight: 350g
Package Included:
1 x camera tester
1 x charger
1 x CCD power cord DC12V OUTPUT & AV cable(2 in 1)
1 x RJ45 adaptor
1 x user manual
FQA:
Q: Why can’tturn on the device?
1.Check battery power capability.
2.Check if correctly using the original manufactured re-charger.
3.Check if the re-charger is normal function.
Q: Why can’t the image function normally?
1.Check if the camera connects correctly with the terminal of the mainframe.
2.Check if the power is on or off.
3.Check power volume. Please recharge if the power is run out.