![Passive PoE 12 volt power extension for Foscam or any 12 volt camera, via Power over Ethernet, up to 328 ft. [WS-PoE-12v-kit]](http://securitysurveillance.listeris.top/wp-content/uploads/2018/04/41LULhnlR1L._SX500_.jpg)
- Make sure this fits by entering your model number.
- Complete kit for 12 volt 1 amp 12 watt Power over Ethernet PoE up to 328ft via Ethernet cable
- See also kits for 1 to 16 cameras
- For Foscam, Wansview, Airsight, EasyN, Apexis, Wanscam and other non-PoE devices
- Adapters available for 0.7mm, 2.5mm. Click on WiFi-Texas to visit the Amazon Store.
- Expert USA Tech Support – call 512 479 0317
Remote Power for 12v Cameras
• Extend power to 328 ft
Use this kit to power
• any 12v device like Foscam, Wansview, Airsight IP Cameras remotely
• up to 328ft from the power source
• These devices provide power on the spare data wires in the ethernet cable
• The splitter at the camera lowers the voltage to 12v to operate the device
This kit contains
• PoE injector with 24v power supply with 110v to 240v
• 50 or 60 hz operation
• 24v to 12v splitter with 2.1mm dc plug
• and 12 watts / 1 amp output
• US style AC power cord
• optional 2.1mm, 2.5mm, USB and iPhone 4s adapters
For Foscam E models
• please see our 48v products – no splitter is required
Other Options
• see our Amazon listings for kits with 4 or 8 cameras
• If you want to power more than 1 device, then use our 8 or 12 port, 24v injector and select the number of 5v splitters you need
• 12v splitters are also available.