- Make sure this fits by entering your model number.
- 12 volt 12 watt Power over Ethernet PoE up to 328ft via Ethernet cable – requires a 48v injector or 802.3af PoE switch
- Use with any PoE switch like Cisco, Netgear, etc with 10/100 or gigabit speeds
- For outdoor Foscam, Wansview, Airsight, EasyN, Escam, Q-See, Apexis, Wanscam and other non-PoE devices For the Roku Ultra, see our GAT-12v25w
- Adapters available for 0.7mm, 2.5mm. Click on WiFi-Texas to visit the Amazon Store
- Backed by PoE Texas’ one year warranty. For expert, USA tech support please call +1 512-479-0317
Remote Power for 12 volt 12 watt non-PoE devices
Extend power to 328 ft
This pair of devices is a
• 802.3af to 12v splitter with 2.1mm x 5.5mm dc plug
• 802.3af compatible for PoE switches
• power and data input via Female RJ45
• Male data only output RJ45
• 10/100/1000 gigabit operation.
To be used with a PoE switch either 802.3af or 802.3at or passive injector
Use these Splitters to power any 12 volt non-PoE device remotely, up to 328ft from the power source.
• These devices share power and data in the ethernet cable. The splitter at the camera lowers the voltage to 12 volts to operate the device.
Other Options
• To power up to many cameras from one power source, use either any PoE switch or use our 4, 8, 12 or 16 port, 48v injector and any non PoE switch.
• WS-POE-12v-8x kit for 8 cameras with 12 volts
• contact us for adapter options for 0.7 mm and 2.5mm
Other Voltages:
• see WT-AF-5v10w for use with 5 volt devices
• see WS-POE-5v-8x for 8 cameras with 5 volts
• see USB versions for powering iPad or Tablets with microUSB and LIghtning
• see microUSB version for dropcam and Raspberry Pi